The cattle offal quarantine conveyor is an advanced large and medium-sized slaughterhouse equipment. The equipment is composed of six parts: driving mechanism, tensioning mechanism, track, hook disinfection box, automatic decoupling device, and transmission chain.
The offal synchronous quarantine conveyor adopts the precise installation and adjustment of the driving mechanism and the tensioning mechanism to make the transmission chain move uniformly and smoothly on the track. When working, the red viscera of the cow body is transported from the hook to the red dirty chute. After the automatic decoupling, the empty hook enters the disinfection box for disinfection. The whole process runs continuously without stopping, with high production efficiency; sanitation, safety, and pollution-free. Turn on the power switch, the reducer drives the main sprocket to rotate, and the drive chain drives the hook to run, forming a closed-loop automatic line. The airbag tensioning mechanism can automatically adjust the tightness of the transmission chain so that the transmission chain and the hook can run smoothly and at a uniform speed.
1. Main use
The red viscera synchronous quarantine conveyor mainly transports the red viscera of the cow body to the predetermined station or into the processing room according to the process design requirements.
2. Main technical parameters
1) Motor power: 2.2KW
2) Production capacity: 200 heads/hour
3) Automatic line-height: H (according to process requirements)
No. We are the original manufacturer of animal slaughtering lines, meat processing equipment, deboning and cutting system, spare parts, etc.
We have 3 slaughtering lines in our factory, including 1 cattle slaughtering line, 1 sheep slaughtering line and 1 pig slaughtering line. We also have deboning and cutting systems, hygiene tools, etc in our factory. You can also see the different design in our sample line room.
Normally, we will need 3 weeks for single machine, and 2 months for a whole production line. For confirmation, we will need to confirm with production director first. However, we will make your production lines as soon as possible.
We will need 30% of total contract value in advance by T/T as deposit. And the balance will be paid before your products are shipped out of factory.
We have our own inspection team in factory. They will inspect the raw material, semi-finished product, finished product following our drawing and standard in quotation sheet. You will get what you see during factory visit and you can check your products during the production anytime during the production.
Yes. We will send 1 engineer for overseas project guiding installation. As a buyer, you will need to pay for the round way air tickets, food and accommodation, local transportation in your project location, and also pay the allowance of the technician during installation.
