The 100 type pig dehairing machine is a kind of pig dehairing equipment designed for the needs of small slaughterhouses. The hair removal space is large, and the grid bracket is added to support the pig body. The dehairing block depilates the pig body from its space. The pig carcass is turned over at the same time of hair removal, which avoids the damage of the meat quality caused by the violent rotation of the drum.
| Production capacity | 70~100 heads/hour |
| Maximum working load | 150kg/pig |
| Shaving time | about 25 seconds |
| Length of shaving space | 1.8 meters |
| Dimensions (L*W*H) | 2370mm*1450mm*2290mm |
| Weight | 1.5 tons |
1. Open the water pipe before starting.
2. The scalded pig carcass must be placed horizontally on the rake, with the pig’s back facing the machine.
3. Before the rake descends, pay attention to check whether there are pig bodies or sundries under the rake, and remove them in time, so as not to encounter these obstacles when the rake descends.
4. When the machine is restarted after stopping, first check whether there are foreign objects in the machine. If there is, it should be removed from the machine in time to avoid damage to the machine.
No. We are the original manufacturer of animal slaughtering lines, meat processing equipment, deboning and cutting system, spare parts, etc.
We have 3 slaughtering lines in our factory, including 1 cattle slaughtering line, 1 sheep slaughtering line and 1 pig slaughtering line. We also have deboning and cutting systems, hygiene tools, etc in our factory. You can also see the different design in our sample line room.
Normally, we will need 3 weeks for single machine, and 2 months for a whole production line. For confirmation, we will need to confirm with production director first. However, we will make your production lines as soon as possible.
We will need 30% of total contract value in advance by T/T as deposit. And the balance will be paid before your products are shipped out of factory.
We have our own inspection team in factory. They will inspect the raw material, semi-finished product, finished product following our drawing and standard in quotation sheet. You will get what you see during factory visit and you can check your products during the production anytime during the production.
Yes. We will send 1 engineer for overseas project guiding installation. As a buyer, you will need to pay for the round way air tickets, food and accommodation, local transportation in your project location, and also pay the allowance of the technician during installation.
