Electric stunner is a small mobile electric stunning equipment in a slaughterhouse. It can stun the pigs after taking a shower, leaving the pigs in a short-term coma. Provide favorable conditions for the next stage of successful bloodletting.
| Power | 1.1KW |
| Stunning time | 5-15s |
| Weight | 26KG |
| Control box material | Spraying plastics |
| Tongs material | Stainless steel 304 |
| Suit for | Pig and sheep abattoir |
| Size | 400*300*200mm |
| The voltage adjust range | 70-250V |
1. Please check all the wire lines are in good condition before power on.
2. Please connect the wiring as indicated, and do NOT connect inversely.
3. Plug into an electric power supply, and turn on the switch on the electric box, and then the power indicator is on. The stunner now is ready to work.
First,you must estimate the weight of the pigs that are going to be stunned. if the pig weights vary a lot, and then set the suitable voltage. And the voltage set below for reference:
Weight: 100kg – 150kg Voltage: 95v-150v
Weight: 150kg – 250kg Voltage: 150v-200v
Weight: > 250kg Voltage: 200v-250v
The supply voltage may vary slightly in different countries or regions. So it’s suggested to adjust the voltage slightly according to stunning effect to prevent pig from overhigh voltage.
1. Improve work safety. Pigs or sheep will struggle too hard in the slaughtering process, threatening the personal safety of workers. The pig /goat was stunned before the bloodletting，it’s safe.
2. Improve meat quality. Stun can reduce the impact of emergency response on the meat quality of pigs or sheep.
3 Electric stunner is to make pigs or sheep die more comfortably, which belongs to humanitarian slaughtering welfare.
4. Reduce environmental noise pollution. Screaming during slaughter belongs to sound pollution, which has adverse effects on people and animals around.
1. The output voltage of this stunner is 70~250V which can make the pig stun for 1~2 minute(s). So it’s suggested to stick the pig for bleeding as soon as possible.
2. Safety warning: If the stunner touches the human body in case of the wrong operation, the person may feel short hemp inductance and dizzy. So for safety, the operator is suggested to wear insulating long gloves and insulating shoes when using the stunner.
No. We are the original manufacturer of animal slaughtering lines, meat processing equipment, deboning and cutting system, spare parts, etc.
We have 3 slaughtering lines in our factory, including 1 cattle slaughtering line, 1 sheep slaughtering line and 1 pig slaughtering line. We also have deboning and cutting systems, hygiene tools, etc in our factory. You can also see the different design in our sample line room.
Normally, we will need 3 weeks for single machine, and 2 months for a whole production line. For confirmation, we will need to confirm with production director first. However, we will make your production lines as soon as possible.
We will need 30% of total contract value in advance by T/T as deposit. And the balance will be paid before your products are shipped out of factory.
We have our own inspection team in factory. They will inspect the raw material, semi-finished product, finished product following our drawing and standard in quotation sheet. You will get what you see during factory visit and you can check your products during the production anytime during the production.
Yes. We will send 1 engineer for overseas project guiding installation. As a buyer, you will need to pay for the round way air tickets, food and accommodation, local transportation in your project location, and also pay the allowance of the technician during installation.
